RJ-11 / PSTN Emulation
The terminal provides an
intelligent RJ11/POTS interface emulating all the standard
features of a PSTN (Public Telephone Service) telephone
service.
The user operates the
connected equipment as though using a standard telephone
connection, as the unit is equipped to provide configurable
ring, busy and dial tones, along with off-hook detection.
The Intelligent interface allows for
easy installation providing flexibility for maximum run
cable length from the RJ11 port as well as the use of
cordless and corded telephone equipment.
Voice Services
The Intelligent Remote Satellite
Terminal supports various options for accessing voice
communications. The terminal will allow the use of an
Intelligent Handset and standard phone equipment through its
intelligent RJ11 connectivity. This means that standard
cordless, corded or PBX systems can be integrated for voice
communications on this terminal.
Intelligent Handset Interface
The
Beam Intelligent Handset, RST970, is an ideal accessory for
voice and SMS communications. The handset is compact,
lightweight, easy to install and comes complete with hang-up
cup, in-built ringer and mounting bracket.
Data Services
All Beam terminals support all of the Iridium
Data services available. This then provides a flexible means
by which to communicate using one or more of the following
protocols;
·
Dial-Up Data Service
·
Direct
Internet Data 10-12 Kbps
·
Short
Message Service (SMS)
·
Short
Burst Data (Selected Providers)
Local/Remote Configuration
The Intelligent
processor inside the RST100 enables the terminal to be
configured remotely or locally. Locally it can be simply
configured with a PC using the Beam Management System (BMS)
supplied.Whilst
using the BMS is the most simple, it is also possible to
configure most of the fields by sending commands to the
terminal using SMS.
Phone Number Processing
The RJ11 port is capable of being
programmed to pre-empt such dialing codes as the
international access of “00” country codes and or area
codes. This also allows for call barring, restrictive dial
and auto-dial functions.
The intelligent number processing is ideal for various
applications to enable ease use by any user. It is also
possible to enable the programming of direct Emergency
Number Numbers and short code voicemail box numbers as
required.
SMS POTS
Support
The Remote Satellite Terminal allows
the use of
an SMS
POTS handset. SMS POTS is a new feature that enables
selected standard type telephone handsets to support SMS
functionality previously only available on more expensive
Intelligent Type handsets.
The specialized handsets
connect to the RST100’s RJ11 connector and enable SMS
messages to be sent, received and stored in the same way as
a cellular phone operates. Cordless and corded options are
available.
Remote Diagnostics
Using SMS with the
intelligence built into the Beam RST100 terminal; it is
possible to remotely configure the communication
terminal. It also gives the ability to run
diagnostic checks, check signal strength, terminal
temperature, retrieve call logs and the ability to have
automated reporting for “still alive” reporting as required.
Installation
The RST100 can be deployed for various
applications. Selecting an appropriate antenna and antenna
cable for the installation is very important for optimum
performance. Mounting brackets, configuration CD and a
110/240 AC/DC plug pack is included with the terminal.
